For Ponds, Spas, Pools, Marine, Construction
For best results clean all surfaces, to be free of grease, algae ect. Place sealer directly on to the surface you wish to bond/seal.
For bonding where there is movement (expansion & contraction) of different substrates, leave a minimum of 2mm thickness of bead width between surfaces.
Where there is livestock near the sealer protect from ingestion while curing. Full cure 24 hours, initial tack 2 – 3 hours.
Can be painted for up to 4 hours, if painting after this time then treat with acetone first.
Bonds all materials even underwater. Eg.
- Butyl rubber
- Wood ect
290ml size comes with applicator nozzle, and requires the use of a universal Cartridge Gun (not supplied) : available from most DIY outlets.=